Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. :
  3. Adventure 390
    4. : How to replace the exhaust pipe of the KTM Adventure 390

Model: Ktm Adventure 390
Part: Muffler
How to replace the exhaust pipe of the KTM Adventure 390

Today's guide will show us the steps to disassemble and replace the exhaust pipe of the KTM Adventure 390 enduro motorcycle. First, we put the motorcycle on the center stand and start by loosening the exhaust silencer screw, then unhooking the springs; once the silencer is removed, we can disassemble the exhaust manifolds by unscrewing the screws at the base of them, as shown in the video. Then we install the new manifolds and finally the new terminal, fixing it correctly to the frame and on the manifold using the bolts provided.


Posted on 15 May 2024 by ScegliAuto



How to replace the engine oil in the KTM Adventure 390?
Adventure 390 In this tutorial, we can see how to replace the engine oil in the KTM Adventure 390, a very simple and fast operation. First of all, we wait for the
Replacing the engine oil and oil filter of the KTM Adventure 390.
Adventure 390 The procedure for replacing the engine oil and oil filter is within everyone's reach; let's see how to perform the service on the KTM Adventure 390.
How do I reset the KTM Adventure 390 service warning light?
Adventure 390 In order to reset the KTM Adventure 390 Service warning light, you need to insert the key to turn on the instrument panel, so that you can move aroun

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos