Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. : Sx 250

Ktm Sx 250 - Videoguide

Ktm Sx 250
How to replace the front wheel bearing of the Ktm SX 250.
Today's guide will show us how to disassemble and replace the front wheel bearing of the Ktm SX 250 enduro motorcycle in simple steps. First, we put the …read all…
Posted on 1 January 2024 by ScegliAuto
Ktm Sx 250
How to replace the crankshaft oil seal on the Ktm SX 250
Let's see in this guide the procedure that will allow us to disassemble and replace the oil seal of the crankshaft and the pinion of the Ktm SX 250 enduro …read all…
Posted on 3 August 2022 by ScegliAuto
Ktm Sx 250
How do you replace the clutch on the KTM SX 250?
In order to replace the clutch of the KTM SX 250 you have to unscrew the bolts that secure the casing located on the right side of the bike, in correspondence …read all…
Posted on 15 April 2024 by ScegliAuto
Ktm Sx 250
How to change gearbox oil on the KTM 250 SX
In this video we will see how to replace the transmission oil, performing the regular routine maintenance service, on a KTM SX 250. First we place the bike on …read all…
Posted on 6 April 2024 by ScegliAuto
Ktm Sx 250
How to change the engine oil of the Ktm SX 250
In this video tutorial we will see the instructions on how to carry out the routine maintenance service, replacing the engine oil, of the Ktm SX 250 enduro …read all…
Posted on 3 April 2024 by ScegliAuto
Ktm Sx 250
How to replace the air filter on the KTM SX-F 250
Let's see in this short and simple video how to remove and replace the engine air filter on the KTm SX-F 250 enduro motorcycle, but also on the 125 and 50, …read all…
Posted on 14 March 2024 by ScegliAuto
Ktm Sx 250
How to replace the rear brake pads on the KTM 250 SX
In this video tutorial we will see how to remove and replace the rear brake pads on the KTM 250 SX enduro bike, but also on most enduro bikes such as Husaberg …read all…
Posted on 7 March 2024 by ScegliAuto
Bearing (1) Air filter (1) Clutch (1) Gear oil (1) Engine oil (1) Brake pads (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos