Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ktm
  4. : Sx F 450

Ktm Sx F 450 - Videoguide

Ktm Sx F 450
How do you replace the exhaust pipe of the KTM SX-F450?

In order to replace the exhaust pipe of the KTM SX-F 450, you need to loosen the two screws that secure it to the appropriate supports: the screws will be …read all…
Posted on 18 March 2024 by ScegliAuto
Ktm Sx F 450
How do you replace the clutch of the KTM SX-F 450?

In order to replace the clutch of the KTM SX-F 450, you need to loosen the screws that secure the clutch cover, which will be on the right side of the …read all…
Posted on 12 March 2024 by ScegliAuto
Ktm Sx F 450
How do i replace the battery of the KTM SX-F 450?

In order to replace the battery of the KTM SX-F 450 you need to loosen the bolts located on the side of the saddle, so that it can be removed. Once the seat is …read all…
Posted on 8 May 2024 by ScegliAuto
Ktm Sx F 450
How do i replace the battery on the KTM SX-F 450?

In order to replace the battery of the KTM SX-F 450 it is necessary to loosen the bolts that fix the saddle in the lateral parts on the left and right side. …read all…
Posted on 26 April 2024 by ScegliAuto
Ktm Sx F 450
How to change the engine oil on the Ktm SX-F 450

Today we will see the procedure necessary to replace the engine oil and the oil filter, carrying out the routine maintenance service, of the Ktm SX-F 450 …read all…
Posted on 23 April 2024 by ScegliAuto
Ktm Sx F 450
Change the engine oil and coolant on the KTM SX-F 450

Today we will see how to carry out the routine maintenance service, replacing the engine oil, the oil filter and the coolant, on the KTM SX-F 450 enduro …read all…
Posted on 16 April 2024 by ScegliAuto
Ktm Sx F 450
How do I replace the fuel pump filter on the KTM SX-F 350?

In order to replace the fuel pump filter on the KTM SX-F 350 you have to remove the saddle and disconnect the connector below, connected directly to the fuel …read all…
Posted on 10 March 2024 by ScegliAuto
Battery (2) Petrol filter (1) Clutch (1) Muffler (1) Engine oil (2)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos