Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to replace the door panel and glass on a Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Door
Operation: How to replace the door panel and glass on a Land Rover Freelander

Open the door involved. Remove the door panel: remove any covers or inserts that hide the panel screws; unscrew all the fixing screws you find, including the hidden ones; carefully detach the panel from the door. It may be necessary to use a plastic tool or a coated screwdriver to avoid damaging the paint or the panel itself. Disconnect the electrical connectors and the handle cable, if present. Disconnect the glass from the lifting mechanism. It may be necessary to remove other screws or components to access the mechanism. Remove the broken glass carefully to avoid further damaging the door or injuring yourself. Install the new glass making sure it is securely attached to the lifting mechanism and moves freely without hindrance. Reassemble the door panel following the steps in reverse order.


Posted on 5 May 2024 by ScegliAuto



How to remove the rear door panel of a Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) Before we are able to start, we will have to open the rear door of our Land Rover Freelander. Let's start by disengaging and removing the insert of t
How to remove the door panel of a Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) Before we begin, we will need to open the front door of our Land Rover Freelander. So let's start by disengaging and removing the inserts and screw c
How to remove the air vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows us how to remove the air vents in a Land Rover Freelander 2. First, the plastic panels located on the sides of the front gl

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos