Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. LEVC
    3. :
  3. Tx
    4. : How do you top up the LEVC TX with engine oil?

LEVC Tx - Video tutorial

Model: LEVC Tx MK 1 - Years 2017-2024
Part: Engine oil
Operation: How do you top up the LEVC TX with engine oil?

In order to top up the LEVC TX with engine oil, you need to open the bonnet, so that you have access to the components inside the engine compartment. In the central part immediately below the windscreen, it will be possible to identify the oil top-up hole, covered by the special cap. Going to open this cap, it will be possible to insert a funnel inside it in order to pour all the necessary oil. The right amount of oil and grade are specified in the car's use and maintenance manual. After topping up, the hole and the hood must be closed.


Posted on 16 December 2022 by ScegliAuto



How to install the divider screen seal kit on LEVC TX eCity
LEVC Tx (2017-2024 / MK 1) The iconic English Taxi LEVC offers a kit to seal the divider screen. The kit is free and the LEVC dealer will install it for free, but our youtuber
How do you set up the preconditioning of the Levc TX?
LEVC Tx (2017-2024 / MK 1) In order to set the preconditioning of the Levc TX while it is connected to a charging column, it will be necessary to use the display located in the
Guide to using the Levc TX control panel
LEVC Tx (2017-2024 / MK 1) Let's see in this guide the functions and how to use the control panel of the Levc TX, following the instructions below. First of all we get on board

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos