Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Lml
    3. :
  3. Star 125
    4. : How do you disassemble the engine of the LML Star 125?

Model: Lml Star 125
Part: Engine
How do you disassemble the engine of the LML Star 125?

The disassembly of the LML Star 125 engine is done by loosening the screws that fix it to its housing, so that it is possible to disconnect all the connectors and intake and exhaust pipes: once the engine block has been removed, it will be possible to proceed by loosening the screws that fix the cylinder, removing it completely and identifying the underlying piston. The latter can be detached from its connecting rod and subsequently access to the engine compartment can be obtained, replacing all the necessary additional components; finally, everything can be reassembled, installing the engine again.


Posted on 9 March 2024 by ScegliAuto



How to replace the Piaggio Vespa PX 125 - LML Star 125 muffler
Star 125 Below we will see the steps necessary to disassemble and replace the muffler of the Piaggio Vespa PX 125 and LML Star 125. First, put the central sta
How to replace the engine of the LML Star 125
Star 125 Today's guide will show us the main steps to disassemble and replace the starter motor of the LML Star 125, as well as the Piaggio Vespa PX 125. Firs
How to remove the front wheel of an LML Star 125
Star 125 Before starting, we will have to go and lift our LML Star 125. So let's start by turning the wheel totally to the right, so as to comfortably reach a

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos