Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Lml
    3. :
  3. Star 125
    4. : How do you replace the rearview mirrors of the LML Star?

Model: Lml Star 125
Part:
How do you replace the rearview mirrors of the LML Star?

In order to replace the rearview mirrors of the LML Star, you need to pry with an object such as a screwdriver to remove the glass of each mirror from its housing. Once the glass has been removed, you can then proceed by locating the screw underneath, inside the mirror cap. Once this screw has been loosened, you can proceed by removing the cap and then you can insert the new one onto its support; after the new cap has been fixed, you can reinsert the glass.


Posted on 22 March 2024 by ScegliAuto



How to remove the front wheel of an LML Star 125
Star 125 Before starting, we will have to go and lift our LML Star 125. So let's start by turning the wheel totally to the right, so as to comfortably reach a
How to replace the Piaggio Vespa PX 125 - LML Star 125 muffler
Star 125 Below we will see the steps necessary to disassemble and replace the muffler of the Piaggio Vespa PX 125 and LML Star 125. First, put the central sta
How do you replace the muffler of the LML Star 125?
Star 125 The procedure for replacing the exhaust on the LML Star 125 involves loosening the screws that secure the exhaust terminal to its housing on the righ

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos