Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. LYNK&CO
    3. :
  3. 01
    4. : How to recharge the battery of the Lynk&Co 01

LYNK&CO 01 - Video tutorial

Model: LYNK&CO 01 MK 1 - Years 2021-2024
Operation: How to recharge the battery of the Lynk&Co 01

In simple and quick steps, we will see how to prepare the car for charging the Lync&Co battery. First, we position ourselves at the charging station; the socket can be found on the front left side of the car. Then, we get into the car and press and hold the button to open the charging socket door for three seconds, inserting the plug to start the charging process, as shown in the video. At this point, we monitor the charging status on the display, disconnecting it when it reaches the optimal percentage.


Posted on 15 March 2024 by ScegliAuto



How to activate the digital key of the Lynk & Co 01?
LYNK&CO 01 (2021-2024 / MK 1) Not everyone knows that it is possible to open your Lynk & Co 01 directly from your smartphone. In this new mini guide, we will explain step by step
How to customize the widgets of the Lynk&Co 01
LYNK&CO 01 (2021-2024 / MK 1) If you want to customize the widgets on the display of your Lynk&Co 01's onboard computer, just follow the steps described in this new guide dedicate
How to connect the smart key to your Lynk & Co 01
LYNK&CO 01 (2021-2024 / MK 1) If you own a Lynk & Co 01 and want to find out how to connect your smart key to the car's onboard computer, all you have to do is read the following

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos