Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xylo
    4. : Troubleshooting for Mahindra Xylo brake booster damage.

Mahindra Xylo - Video tutorial

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Brake oil
Operation: Troubleshooting for Mahindra Xylo brake booster damage.

As shown in the video, we explain how to repair damages to the brake booster of the Mahindra Xylo. The damaged brake pedal will make a hissing sound as it means that it is losing air and will have less stability. It is likely that the front disc will work but the rear drum will not, and the oil will not flow to the rear wheel cylinders of the LSP valve. As shown in the video, it is necessary to replace the brake booster by disconnecting all electrical lines and tubes from the master cylinder. After installing the new brake booster, fill the brake pump reservoir with DOT 3 brake oil and bleed the brake lines by pumping the brake pedal.


Posted on 29 April 2023 by ScegliAuto



How do you replace the front brake pads on the Mahindra Xylo?
Mahindra Xylo (2009-2019 / MK 1) In order to replace the front brake pads of the Mahindra Xylo you need to lift the car so that it is not in contact with the floor: then you can loos
How to install the plastic wheel covers on the Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) In this video we show you how to install the plastic wheel covers on the Mahindra Xylo. If you want to replace the wheel covers of your Mahindra Xylo
How to change front bumper in Mahindra Xylo?
Mahindra Xylo (2009-2019 / MK 1) To replace the front bumper of the Mahindra Xylo we must first disassemble the old one. To proceed with this operation, all the fastening screws must

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos