Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Thar
    4. : How do you reset the Service light on the Mahindra Thar?

Mahindra Thar - Video tutorial

Model: Mahindra Thar MK 2 - Years 2020-2024
Part: Checks and maintenance
Operation: How do you reset the Service light on the Mahindra Thar?

To reset the Service light of the Mahindra Thar, you need to press and hold the menu button located on the lower left side of the dashboard, next to the steering column. This button should be held down while the instrument panel is turned off. While still holding the button, you can insert the ignition key and turn it to start the instrument panel. By doing this, you will notice that the Service light will not appear on the instrument panel. Now you can access the menu on the central display to verify that the maintenance interval has been reset.


Posted on 1 February 2024 by ScegliAuto



How to reset the service in the Mahindra Thar?
Mahindra Thar (2020-2024 / MK 2) In this tutorial we can see how to reset the service in the Mahindra Thar, a very simple operation. Before proceeding, let's of course make sure that
How to reset the Mahindra service light
Mahindra Thar (2010-2020 / MK 1) The procedure required to be able to manually reset the service light of your Mahindra Thar Mk1 is very simple. Thanks to the following indications y
How to reset partial kilometers of Mahindra Thar
Mahindra Thar (2020-2024 / MK 2) In order to reset the partial kilometers counter (Trip A) traveled with your Mahindra Thar Mk2, you need to carry out the following manual reset proc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos