Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Malaguti
    3. :
  3. Spidermax Gt 500
    4. : How do you replace the transmission of the Malaguti Spidermax GT 500?

Model: Malaguti Spidermax Gt 500
Part: Transmission
How do you replace the transmission of the Malaguti Spidermax GT 500?

The transmission replacement on the Malaguti Spidermax GT 500 is done by loosening the bolts that secure the casing on the left side of the rear wheel. Once the casing is open, it will be possible to access the underlying components by loosening the central pin of the variator and the pin of the clutch bell. This will allow both components, along with the corresponding transmission belt, to be removed. Now it will be possible to install the new variator and clutch by inserting the transmission belt around them and reinstalling the casing.


Posted on 2 February 2024 by ScegliAuto



How do you replace the transmission of the Malaguti Spidermax GT 500?
Spidermax Gt 500 The procedure for replacing the transmission on the Malaguti Spidermax GT 500 involves loosening the bolts that secure the casing near the rear wheel
How do you replace the transmission of the Malaguti Spidermax GT 500?
Spidermax Gt 500 The procedure for replacing the transmission on the Malaguti Spidermax GT 500 involves loosening the bolts that secure the housing at the rear wheel
How do you replace the transmission of the Malaguti Spidermax GT 500?
Spidermax Gt 500 In order to replace the transmission of the Malaguti Spidermax GT 500 it is necessary to loosen the bolts that secure the casing at the rear wheel. O

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos