Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maxus
    3. :
  3. G10
    4. : How to use the Maxus G10 navigator.

Maxus G10 - Video tutorial

Model: Maxus G10 MK 1 - Years 2014-2023
Part: Checks and maintenance
Operation: How to use the Maxus G10 navigator.

Let's see in this short and simple guide how to use the satellite navigator of the Maxus G10, but also of the LDV G10. First of all, let's get on board the car and turn on the dashboard; then let's move to the central display to go to the navigation, pressing the appropriate button. At this point, we follow the procedure indicated to set our destination; we will then see that the navigation system will calculate the itinerary based on our travel needs. The version of the navigator shown in the video is an updated version compared to the original one.


Posted on 23 June 2023 by ScegliAuto



Where is the fuse box located in the Maxus G10?
Maxus G10 (2014-2023 / MK 1) If you are curious to know the exact location of the fuse box in your Maxus G10, all you need to do is read the instructions in the following mini gu
How is the service done on the Maxus G10?
Maxus G10 (2014-2023 / MK 1) To be able to service the Maxus G10 you have to go and lift the car, so that you can unscrew the oil drain plug. All the oil that escapes must be col
How to change the Maxus G10 watch
Maxus G10 (2014-2023 / MK 1) Let's see in this guide how to change the date and time of the Maxus G10, following these simple and quick steps. First of all we get in the car and

    Frequently Asked Questions

    • Maxus G10 2014-2023 - How much does the Maxus G10 cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos