Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Rx 8
    4. : How to change differential oil in Mazda Rx8

Mazda Rx 8 - Video tutorial

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Differential
Operation: How to change differential oil in Mazda Rx8

To change the diff oil on the Mazda Rx8, we start by unscrewing the diff oil drain plug located behind the drain with a 24 socket wrench and draining the diff oil into a container; once the oil has been drained, (in the video the drain plug is also replaced) replace the drain plug gasket, clean the seat and screw the drain plug back in with a 24 socket wrench. Once the drain plug has been screwed back in, unscrew the filling immediately above, pour the liters indicated by the house into a bottle, aided by a small pump, pump the oil into the hole just above the drain hole and when we notice that the oil is about to leak, screw the cap back on with the same 24 socket wrench and the operation is finished.


Posted on 7 May 2023 by ScegliAuto



How to change the oil and oil filter on Mazda Rx8
Mazda Rx 8 (2003-2012 / MK 1) Let's see below how to change the oil and filter on the car: open the bonnet and unscrew the oil filler cap located under the engine cover. Then rais
How to replace the air filter on a Mazda Rx8.
Mazda Rx 8 (2003-2012 / MK 1) Do we intend to replace the air filter ourselves on this car model? In the description below, we will find everything that can be useful and importan
Changing the gear oil
Mazda Rx 8 (2003-2012 / MK 1) The gearbox oil also needs to be replaced periodically, but if problems arise when engaging the gears in the gearbox, it is advisable to replace the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos