Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Bongo Brawny
    4. : How to replace the rear brakes of the Mazda Bongo

Mazda Bongo Brawny - Video tutorial

Model: Mazda Bongo Brawny - Years 1995-2005
Part: Drums and shoes
Operation: How to replace the rear brakes of the Mazda Bongo

Today we will see the main instructions useful for disassembling and replacing the rear drum brakes of the Mazda Bongo vehicle. First of all, lift the rear wheel off the ground and unscrew its fixing bolts to remove it; then unscrew the drum bolts to access the brake plate and the brake shoes, as shown in the video. At this point, we proceed to release and remove the brake shoe mechanism, removing them and replacing them with new ones; clean the brake system from any remaining dirt and then reassemble the new brake shoes and finally the rear drum!


Posted on 4 March 2024 by ScegliAuto



How do you replace the rear light bulb on your Mazda Bongo?
Mazda Bongo Brawny (1995-2005 / ) In order to replace the rear light bulb on the Mazda Bongo, you need to open the tailgate so that you can access the screws on the side of the lighth
Guide to replacing the rear brake pads of the Mazda Bongo.
Mazda Bongo Brawny (1995-2005 / ) Let's briefly go through the main steps that will allow us to disassemble and replace the rear brake pads of the Mazda Bongo. First, we lift the car
Replacement of the rear brake pads on the Mazda Bongo
Mazda Bongo Brawny (2019-2024 / MK 5) Today we will see the main instructions that will allow us to disassemble and replace the rear brake pads of the Mazda Bongo. First, lift the rear pa

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos