Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 9
    4. : How to replace the license plate light bulbs in the Mazda CX-9?

Mazda Cx 9 - Video tutorial

Model: Mazda Cx 9 TB - Years 2007-2015
Part: License plate light
Operation: How to replace the license plate light bulbs in the Mazda CX-9?

In this tutorial, we can see how to replace the license plate light bulbs in the Mazda CX-9, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door and locate the light in question. Next, insert a flat-tipped screwdriver into the internal slot of the glass, lever it and separate it from the support. At this point, remove the old bulb, insert a replacement preferably LED type, and reassemble everything following the reverse procedure. Repeat the operation on the opposite light, if necessary.


Posted on 8 April 2024 by ScegliAuto



How to replace the Mazda CX-9 interior ceiling lights
Mazda Cx 9 (2007-2015 / TB) Today we will see, in this video tutorial, how to remove and replace the interior lights of the Mazda CX-9 passenger compartment ceiling light, in si
How to reset the tire pressure light in the Mazda CX-9?
Mazda Cx 9 (2016-2023 / TC) In this tutorial, we can see how to reset the tire indicator light in the Mazda CX-9, an extremely simple and quick operation, to be performed only a
How to reset the oil light on the Mazda CX9.
Mazda Cx 9 (2016-2023 / TC) The procedure necessary to manually reset the oil light on your Mazda CX 9 second generation (year 2016-2023) is practically identical to the one alr

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos