Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : How to recalibrate the windows of the Mazda CX-5 after the battery has been disconnected

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 2 - Years 2017-2023
Part: Window lift button
Operation: How to recalibrate the windows of the Mazda CX-5 after the battery has been disconnected

In this video we see how to recalibrate the windows of a Mazda CX-5 after the battery has been disconnected, perhaps to do some electrical work or for a replacement. In fact, in this case the windows lose the automatic calibration of the driver and need to be reprogrammed. So we have to open the window completely while holding down the button for ten seconds; in this way we store the lower limit. Now we raise it completely and repeat the same procedure with the window raised, to store the lower limit: so we hold down the button counting to ten. The reprogramming is complete.


Posted on 3 May 2024 by ScegliAuto



How do i replace the battery of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) The Mazda CX-5 battery is located inside the engine compartment, in the center immediately below the windshield. In order to reach it, it will theref
How to reset the windows in a Mazda CX-5.
Mazda CX-5 (2012-2017 / MK 1, KE) When repairs are made to our car that involve removing the battery, we may find that the automatic window closing function is disabled. In this video
How do you replace the battery in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) Replacing the battery of the Mazda CX-5 is done by opening the hood and locating the battery on the right side of the engine compartment, just below

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos