Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 2
    4. : How to adjust the time on the Mazda 2

Mazda 2 - Video tutorial

Model: Mazda 2 MK 1, DY - Years 2002-2007
Part: Checks and maintenance
Operation: How to adjust the time on the Mazda 2

In this video tutorial, we will see how to adjust the time of the Mazda 2, following these simple and quick steps. First of all, we get on board the car and start the instrument panel; then we go to the menu settings and then to the clock option, until the numbers of the time flash, as shown in the video. At this point, we adjust the hour and then the minutes through the arrow controls; then we exit the settings menu to save the changes made, turning off the instrument panel and starting the engine!


Posted on 19 May 2024 by ScegliAuto



How to adjust the time in the Mazda 2?
Mazda 2 (2007-2014 / DE, MK 2, DH) In this tutorial, we can see how to adjust the time in the Mazda 2, an extremely simple and quick operation to be performed, for example, after the b
How do you replace the Mazda 2 gear knob?
Mazda 2 (2007-2014 / DE, MK 2, DH) To replace the Mazda 2 gear knob, simply grab the old knob and turn it counterclockwise, so that it can be unscrewed from the gear lever. This is pos
How to reset the service light on Mazda 2
Mazda 2 (2014-2023 / DJ, MK 3) To manually reset the service light on your Mazda 2 (Mk2), you only need a few seconds thanks to the following procedure, which also doesn't require

    Frequently Asked Questions

    • Mazda 2 2007-2014 - Why is the radio of the 2014 Mazda 2 not working? Read Answer
    • Mazda 2 2007-2014 - What are the Mazda 2 warning lights? Read Answer
    • Mazda 2 2007-2014 - What pies are there on the Mazda 2? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos