Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : How to replace the soft top leather on a Mercedes Slk

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Electric fan
Operation: How to replace the soft top leather on a Mercedes Slk

How to replace the soft top leather on a Mercedes Slk? Let's see how to proceed: with a screwdriver (unscrew the screws) remove the side plastic cover edges placed on the sides of the hood, then unscrew the nuts placed on it with a fixed or socket wrench (if present). Once the screws have been unscrewed: let's move the soft top back (as in the video). We detach the plastics of the soft top on the upper side of the car and remove the leather of the soft top placed on the frame of the opening frame of the car. Finally, remove the new leather belt from the hood and get ready to mount the plastic with the tightening screws.


Posted on 9 November 2023 by ScegliAuto



How to manually close and open the convertible top of the Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) In this guide, we will see the main steps that will allow us to manually close and open the soft top of the Mercedes SLK. First of all, we open the f
Instructions for topping up the soft top fluid on the Mercedes SLK 1
Mercedes Slk (1997-2004 / R170, MK 1) In this guide we will see the instructions that will allow us to top up and introduce the new fluid inside the hydraulic pump of the soft top on the
Soft top piston oil leak on Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) If the headlining piston of your Mercedes SLK R170 leaks oil, don't worry. Unfortunately, this is a recurring problem on this model of car but it is

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos