Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Clk
  6. : How do you replace the power steering oil of the Mercedes CLK?

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Power steering oil
Operation: How do you replace the power steering oil of the Mercedes CLK?

To replace the power steering oil in the Mercedes CLK, you need to open the hood so that you can locate the tank containing the power steering oil. Next to it will be the tube that allows the fluid to pass through. By loosening the corresponding ring, you can drain all the oil by continuously turning the steering wheel. Once the fluid has drained, you can add new power steering oil to the tank. After topping up, you can close the hood and check that the power steering is functioning properly.


Posted on 24 April 2023 by ScegliAuto



Disassembly of the steering wheel airbag on Clk
Mercedes Clk (2002-2010 / W209) Do we want to remove the steering wheel airbag on a Mercedes Clk? Let's see how the airbag is removed from above the steering wheel of the Clk. We di
How to remove the instrument cluster on Mercedes Clk
Mercedes Clk (2002-2010 / W209) Do we want to remove the instrument panel of the Mercedes Clk? Let's see how the instrument panel is removed from inside the dashboard. With a lever,
How to measure the oil of the Mercedes CLK
Mercedes Clk (2002-2010 / W209) As a first operation it will obviously be necessary to insert the key in the appropriate slot and rotate it to reach position 2, i.e. pre-injection,

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos