Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to replace the alternator of the Mercedes Sprinter.

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Alternator
Operation: How to replace the alternator of the Mercedes Sprinter.

In this video tutorial, we will see how to disassemble and replace the alternator of the Mercedes Sprinter, following the instructions below. First, we open the hood of the car and disconnect the battery as a precautionary measure. Then, we lift the car to access the alternator by unscrewing the fastening screws and disconnecting the electrical wiring to remove it, as shown in the video. At this point, we either repair the alternator or directly install the new original one; we fix it properly and make the electrical connection, following the video tutorial until the end!


Posted on 1 September 2023 by ScegliAuto



Replacing the alternator on the Mercedes Sprinter MK2 (906)
Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video we will see how to disassemble and replace the alternator on the second series Mercedes Sprinter (906), following the instructions b
How to check that the alternator is charging on your Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video we see how we can check if the alternator of our Mercedes Sprinter loads correctly, without any tool, just using the hidden menu of the
Disassembly of the alternator on Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) To begin, lift the hood and put on the special support rod. Then, for safety reasons, disconnect the two poles of the battery (you always start by di

    Frequently Asked Questions

    • Sprinter 2018-2030 - How long does it take to replace the Mercedes Sprinter alternator? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos