Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe E
  6. : How do you reset the control unit of the Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Control unit
Operation: How do you reset the control unit of the Mercedes E-Class?

In order to reset the control unit of the Mercedes E-Class, you need to completely remove the piece from its housing so that it can be connected to the computer using the appropriate wiring. Once the control unit is connected, you can use the program shown in the tutorial to select the corresponding car model and version. Once the correct settings are entered, you can reset all the errors stored in the control unit and then reassemble and connect the device to the respective car.


Posted on 15 October 2023 by ScegliAuto

This video is currently unavailable


Replacement of the control unit of the Mercedes E-Class.
Mercedes Classe E (2002-2009 / W211) .. and replace the control unit of the Mercedes E-Class. First, we open the car's engine hood and start by disconnecting the main electrical connector..
How to reset the parking sensors on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. parking sensor control unit of the Mercedes E-Class; the procedure takes place when the parking sensors are blocked or not working. The first test..
How to reset the engine ECU of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the various control units of the Mercedes E-Class engine, using a special diagnostic tool. First of all we get on board the car and start connecting..

    Frequently Asked Questions

    • Classe E 2002-2009 - Where is the control unit of the Mercedes E-Class located? Read Answer
    • Classe E 2016-2023 - Where is the AdBlue control unit located in the Mercedes E-Class? Read Answer
    • Classe E 2009-2016 - Where is the ECU located in the Mercedes E-Class? Read Answer
    • Classe E 2009-2016 - Where is the ECU located in the Mercedes E-Class W212? Read Answer
    • Classe E 2016-2023 - Where is the ECU of the Mercedes E-Class W213 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos