Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How do you replace the axle boot on a Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Drive shaft boot
Operation: How do you replace the axle boot on a Mercedes A-Class?

The replacement of the Mercedes Classe A axle boot is done by lifting the car with a jack or a lift, so that the bolts securing the corresponding front wheel can be loosened. Once this wheel has been removed, it will be possible to proceed by loosening the screws that secure the axle to the wheel hub and differential: in this way, the axle can be completely removed from its housing, allowing for the removal and replacement of the corresponding boot. After the replacement, all previously removed components can be reinstalled.


Posted on 6 November 2023 by ScegliAuto



How to replace the gear knob of the Mercedes A-Class.
Mercedes Classe A (1997-2004 / W168) .. and replace the gear knob of the Mercedes A-Class. First of all, we get in the car and start by releasing and removing the gear lever boot from the..
How do you replace the gear knob on the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. In order to replace the Mercedes A-Class gear knob, you have to unhook the clips at the base of the knob's leather boot, so that it can..
How do you replace the Mercedes A-Class drive shaft boot?
Mercedes Classe A (2004-2012 / W169) .. replace the drive shaft boot of the Mercedes A-Class you have to go and lift the car using a jack or a bridge, so that the corresponding wheel is not..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos