Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Guide to replacing the injectors of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Injectors
Operation: Guide to replacing the injectors of the Mercedes C-Class.

The institutions mentioned in this guide will show us how to dismantle and replace the injectors of the Mercedes C-Class. First, we open the engine hood and remove the plastic cover of the engine; then, we disconnect the rail pipe using a wrench, and then release the metal clamp of the injector, as shown in the video. At this point, we disconnect the electrical connector to remove and replace the injectors with the new ones; subsequently, we code the new injectors to the control unit, reassembling everything, following the video tutorial until the end!


Posted on 25 November 2023 by ScegliAuto



How to remove the injectors of the Mercedes C-Class CDI
Mercedes Classe C (2007-2013 / W204) Let's find out in this guide how to disassemble and replace the fuel injectors of the Mercedes C-Class, following the instructions below. First we op
Removing the Mercedes C-Class 200 CDI injectors
Mercedes Classe C (2007-2013 / W204) In this video tutorial we will explain the main steps to be able to disassemble the injectors of a Mercedes C-Class 200 CDI. First of all, we open th
How do you replace the injectors on the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) In order to replace the injectors on the Mercedes C-Class, you need to open the bonnet so that you have access to the components inside the engine co

    Frequently Asked Questions

    • Classe C 2007-2013 - What problems can the injectors of the Mercedes C-Class w204 have? Read Answer
    • Classe C 1993-2000 - Where are the injectors of a Mercedes C-Class located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos