Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How do you replace the gearbox oil in the Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Gear oil
Operation: How do you replace the gearbox oil in the Mercedes E-Class?

In order to replace the transmission oil of the Mercedes E-Class, you need to lift the car and loosen the drain plug located at the bottom of the oil tank. Once this plug has been removed, it will be possible to drain all the used oil into a properly positioned container. When the oil has finished draining, it will be possible to refill it through the same vent by pushing the oil in with suitable equipment. Once the refill is complete, the drain plug can be reinserted and securely fastened.


Posted on 7 January 2024 by ScegliAuto



How maintenance is done on an automatic gearbox on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. automatic gearbox is carried out on a Mercedes E-Class. First of all, the washing liquid is introduced into the automatic gearbox with a special machine,..
How do you reset the automatic gearbox of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. On the Mercedes E-Class, the reset operation of the automatic gearbox is carried out by turning on the instrument panel,..
Gearbox oil change and full maintenance
Mercedes Classe E (2009-2016 / W212) If problems arise when engaging gears in the automatic gearbox, the gearbox oil must be washed and replaced. Raise the car on the bridge. Unscrew the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos