Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How do you replace the water pump of the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W168 - Years 1997-2004
Part: Pump
Operation: How do you replace the water pump of the Mercedes A-Class?

In order to replace the water pump of the Mercedes A-Class, you need to loosen the screws that secure the right front wheel of the motorcycle, removing it along with the corresponding inner fender lining. Once these components have been removed, it will be possible to locate the pulley of the water pump, to which the central nut must be loosened. By removing the pulley, it will also be possible to remove the underlying water pump, so that it can be replaced with a new spare part; after the replacement, all components can be reassembled, ensuring that everything is functioning properly.


Posted on 25 January 2024 by ScegliAuto



How to disassemble the water pump of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. have to open the front hood of our Mercedes A-Class. Let's start by loosening the belt tensioner of the services belt, and then remove the belt itself...
How to replace the water pump of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. and replace the water pump of the Mercedes Class A, as well as the Class B. Firstly, we open the engine hood and begin to locate the water pump,..
Mercedes A-Class water pump replacement
Mercedes Classe A (2012-2018 / W176) .. the water or coolant pump of the Mercedes A-Class. First of all, open the bonnet and start by removing the service belt, loosening the belt tensioner;..

    Frequently Asked Questions

    • Classe A 2012-2018 - How much does the fuel pump for the Mercedes A-Class cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos