Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the window buttons of the Mercedes C-Class.

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Window lift switch
Operation: How to replace the window buttons of the Mercedes C-Class.

Today's steps will show us the process of disassembling and replacing the window lift buttons of the Mercedes C-Class. First, we open the front door and start prying on the side cover of the window lift switch panel to remove it. Then, we disassemble the entire switch panel and disconnect the electrical connector underneath, as shown in the video. At this point, we proceed to remove and replace the individual button if necessary, or the entire switch panel. We install and electrically connect the switch panel, following the video tutorial until the end.


Posted on 3 February 2024 by ScegliAuto



How to change the window buttons of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. the power window buttons of the Mercedes C-Class. First of all, open the front door and begin to disassemble the door panel, unscrewing all the..
How to remove the window lifter button on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. have to open the driver's door of our Mercedes C-Class. Let's start by unscrewing the screw that secures the cover of the internal lock, and then removing..
Removing the rear window on Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) In this video tutorial we will see how to remove the rear window on a Mercedes C-Class W204, following these simple steps. First of all, let's get a

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos