Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you top up the coolant in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Antifreeze liquid
Operation: How do you top up the coolant in the Mercedes C-Class?

In order to top up the coolant of the Mercedes C-Class, you need to open the hood so that you can access the components located in the engine compartment: on the left side of the engine compartment, near the passenger side, you will find a dark-colored reservoir. You will need to carefully unscrew the cap to avoid bursts due to pressure differences: once the cap is unscrewed, you can top up the coolant by adding the necessary amount of liquid. After topping up, you can close the reservoir and make sure everything is functioning properly.


Posted on 18 February 2024 by ScegliAuto



How to top up the coolant on a Mercedes C-Class.
Mercedes Classe C (2007-2013 / W204) .. To top up the coolant on a Mercedes C-Class by ourselves, we need to open the hood and locate the reservoir, which is located in the front..
How to replace coolant on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. drain and top up the coolant on the Mercedes C-Class. First, we raise the car and begin to remove the plastic bulkhead that we find under the engine,..
How do you top up the coolant of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. to perform the coolant refill on the Mercedes C-Class, you need to open the hood so that you can access the components located inside the engine compartment...

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos