Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the control module of the automatic transmission in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Transmission
Operation: How to replace the control module of the automatic transmission in the Mercedes C-Class?

In this tutorial we can see how to replace the command module of the automatic transmission in the Mercedes C-Class, a very simple and quick operation. First of all, make sure that the key is not inserted, then open the passenger door, go under the dashboard and, by unscrewing the three bolts indicated with a 10mm socket wrench, remove the separation panel. On the back of the panel you can find the control unit in question, which can be removed simply by disconnecting the connectors and unscrewing the fixing screws. To install the replacement, just follow the reverse procedure.


Posted on 1 May 2024 by ScegliAuto



How to reset the automatic transmission of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. our automatic transmission of the Mercedes C-Class, following the instructions below. First of all we get on board the car and start turning on the..
How do you reset the automatic transmission of the Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. the automatic transmission of the Mercedes C-Class is done by turning on the instrument panel, turning the appropriate key inside the ignition switch:..
How do you reset the automatic transmission of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. of the automatic transmission on the Mercedes C-Class, it is necessary to turn on the instrument panel by turning the appropriate key inside the ignition..

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos