Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to remove the radiator fan of the Mercedes Sprinter

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Radiator
Operation: How to remove the radiator fan of the Mercedes Sprinter

Removing the radiator fan from the Mercedes Sprinter is a fairly simple operation. We start by opening the front hood and then removing the elements that obstruct the passage to the fan, on this specific model we will have to remove the reinforcement bar and part of the air block. Once the elements have been removed, we continue the removal process by disconnecting the fan activation connector and locking it to prevent it from spinning, and finally removing the fan mounting elements. We conclude by removing the fan and cleaning any dust and grease, if necessary, from its housing and the radiator.


Posted on 5 May 2024 by ScegliAuto



Disassembly of the cooling radiator on the Mercedes Sprinter MK1
Mercedes Sprinter (1995-2006 / W901, MK 1) In this video tutorial we will see the main steps to disassemble and replace the cooling radiator on the Mercedes Sprinter first series. Before proce
Where are the fuses located in the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) Each fuse of the Mercedes Sprinter is located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it is poss
How to replace the passenger compartment fan of a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Before we can begin, we will have to go and sit in the front passenger seat of our Mercedes Sprinter. So let's start by going to open the glove compa

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos