Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How do you remove the rear light of the Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Tail light
Operation: How do you remove the rear light of the Mercedes E-Class?

In order to remove the rear light of the Mercedes E-Class, you need to open the rear hatch to access the components inside the trunk: on the left side of the trunk, you will need to remove the inner protective panel and loosen the screws underneath. These can then be removed, allowing you to slide out the light unit from its housing: after removal, you can disconnect the connectors, to which you will need to connect the new light. The new light can then be fixed in place to ensure that everything is working correctly.


Posted on 8 May 2024 by ScegliAuto



How to remove the rear seat bench of a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. have to open the rear doors of our Mercedes E-Class. Let's start by disengaging and removing the cover of the rear cup holders, and then disassemble..
How to remove the ceiling light on the Mercedes E-Class
Mercedes Classe E (1995-2002 / W210) .. light panel on the roof of the Mercedes E-Class it is necessary to locate the ceiling light located on the roof in correspondence with the central..
Removal of rear lights ceiling on Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the passenger compartment lights on a Mercedes E-Class W211, fourth series. First of all, let's get inside the car and get a very thin plastic lever;..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos