Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the rear door handle in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Handle
Operation: How to remove the rear door handle in the Mercedes C-Class?

In this tutorial we can see how to disassemble the rear door handle in the Mercedes C-Class, an extremely simple and fast operation. First of all, we open the door we will be working on, then we locate the small plastic cap on the inner edge and remove it. We then unscrew the bolt accessible from the hole using a long Torx T20 screwdriver, also being careful not to drop the bolt itself, pull the handle towards us and remove the indicated plastic element. At this point, we can definitively separate the handle from the door and install the replacement.


Posted on 13 May 2024 by ScegliAuto



How to remove the rear door panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. have to open the rear door of our Mercedes C-Class. Let's start by unscrewing and removing all the screws that secure the rear door panel to the door..
How to remove the rear door panel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. have to open the rear door of our Mercedes C-Class. Let's start by unscrewing and removing all the fixing screws of the rear door panel. Once we have..
How do you remove the exterior handle of the Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. handle of the rear door of the Mercedes C-Class you must obviously open the door and go and remove the gasket that covers the entire outside of..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos