Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Disassembly and replacement of the window switch of the Mercedes E-Class

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Window lift switch
Operation: Disassembly and replacement of the window switch of the Mercedes E-Class

Below we will see the steps that will allow us to disassemble and replace the window switch of the Mercedes E-Class. First, we open the door and start unscrewing the fastening screws of the lock; then we remove the side plastic cap, unscrewing the additional screws of the door panel until we detach and remove it, as shown in the video. At this point, we disconnect the electrical connector of the window switch button and the handle cable; this way we can remove and replace the window switch, applying the reverse procedure for reassembly!


Posted on 13 May 2024 by ScegliAuto



How to replace the stop switch on Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) .. the brake pedal switch on a Mercedes Benz E-Class W210. First we open the front door and we go to remove the plastic bulkhead that we find above..
Mercedes E Class 320 W211 light switch replacement
Mercedes Classe E (2002-2009 / W211) .. to disassemble the light switch of a Mercedes E-Class 320 W211, third series. First of all we get on board the car and we go to remove the plastic frame..
How to remove the Mercedes E-Class Coupe door panel
Mercedes Classe E (2002-2009 / W211) .. go to disassemble the door panel of a Mercedes E-Class Coupeè Before starting the disassembly work, we are going to disconnect the battery terminals. L..

Other guides that may interest you

    Frequently Asked Questions

    • Classe E 1995-2002 - How do you program the window regulators of the Mercedes W210? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos