Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe E
  6. : How to reset the sunroof of a Mercedes E-Class W211 version

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Bodywork
Operation: How to reset the sunroof of a Mercedes E-Class W211 version

In this video we can see how to reset the sunroof of a Mercedes E-Class W211 version. This operation must be done every time we change the car's starter battery, so we need to reprogram the lower and upper stops of the windows and also the sunroof. The first thing to do is to press the open button for five seconds; then we will also press the close button for five seconds. When it is in position, hold it down for another five seconds; we will do the same for closing. Now it should be correctly reprogrammed. Make sure of this, otherwise repeat the procedure.


Posted on 17 May 2024 by ScegliAuto



Guide to replacing the Mercedes E-Class sunroof.
Mercedes Classe E (2002-2009 / W211) In this guide, we will see the main instructions that will help us in the process of disassembling and replacing the sunroof motor of the Mercedes E-
How to close the faulty sunroof on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) In this guide, we will see the instructions that will allow you to close the faulty sunroof of the Mercedes E-Class, following these simple steps. Fi
Where is the EOBD diagnostic port located on the Mercedes E-Class W211 version?
Mercedes Classe E (2002-2009 / W211) .. On Board Diagnostic) port on the Mercedes E-Class W211 version: this port is very useful if you are DIY enthusiasts and are interested in being able..

    Frequently Asked Questions

    • Classe E 2002-2009 - Where is the central locking pump of the Mercedes E-Class W210 housed? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos