Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to replace the Mg 3 exhaust

MG 3 - Video tutorial

Model: MG 3 MK 1 - Years 2008-2011
Part: Muffler
Operation: How to replace the Mg 3 exhaust

If we want to proceed with a do-it-yourself intervention to replace and install a more performing exhaust terminal on our car, we can follow the instructions given in this description and by taking a look at the images in the video. The first thing to do is lift the car onto the lift and remove the bolts fixing the exhaust pipe to the muffler. Then release the exhaust pipe support located under the rear bumper and release all the pipes. Then proceed to remove the bolts of the flange connecting the muffler to the exhaust manifold. Then take the new kit made up of pipes and muffler and place it in place of the old one. Then screw the bolts of the two flanges back on and you're done.


Posted on 22 April 2023 by ScegliAuto



How to replace the MG 3 key battery
MG 3 (2011-2023 / MK 2) In order to correctly replace the key battery of your MG 3 Mk2 it only takes a few seconds. Just follow the instructions in the following mini guide.
How to replace the rear light bulb on the MG 3?
MG 3 (2011-2023 / MK 2) In order to replace the rear light bulb of the MG 3 you have to go to open the tailgate of the car, so that you go to loosen the two screws next to i
How to replace cabin air filter on Mg 3
MG 3 (2011-2023 / MK 2) If we need to replace the cabin air filter on this car let's take a look at the video and description below. Access the passenger compartment from th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos