Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to disassemble the trunk opening button on the Mini One?

Mini - Video tutorial

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Push button
Operation: How to disassemble the trunk opening button on the Mini One?

In this tutorial, we can see how to disassemble the trunk opening button in the Mini One, a very simple and quick operation to be carried out, for example, in case we need to replace it. First of all, let's go to the back of the vehicle, then unscrew the four screws indicated with a T20 Torx screwdriver. Then, separate the entire plastic support from the tailgate, disconnect the power connector, and, both by releasing the fixing clips and by leveraging along the joint, detach the internal base from the rest of the support. At this point, we will have obtained access to the button in question.


Posted on 5 January 2024 by ScegliAuto



The reason why the rear hatch of a Mini does not open.
Mini (2007-2014 / R55, R57, R56) In this video, we see how to open the trunk of the Mini Cooper, which has no difficulty opening. We see this particular example where the trunk opens
How to open the bonnet and trunk of the Mini One
Mini (2007-2014 / R55, R57, R56) To open the bonnet of the Mini Cooper you have to go inside the car in the driver's seat, go to the area of the mats and on the left plastic there is
Accessories for the Mini's trunk
Mini (2017-2023 / Countryman2, F60) In this video, we see some accessories that can be very useful for the trunk of our Mini: the first one is a molded mat, which protects the trunk fro

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos