Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to replace the windshield washer pump in the Mini Cooper?

Mini - Video tutorial

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Pump
Operation: How to replace the windshield washer pump in the Mini Cooper?

In this tutorial we can see how to replace the windshield washer pump in the Mini Cooper, an extremely simple and quick operation. First of all, we lift the front left side of the vehicle, taking all necessary safety measures, then we remove the wheel and detach the inner cover of the wheel arch by removing the various plastic rivets. We then locate the pump, disconnect the tubes connected to it and remove it from the housing. At this point, all that remains is to insert the replacement, reassemble everything and refill any lost liquid through the appropriate cap.


Posted on 7 May 2024 by ScegliAuto



Replacement of the windshield of the Mini Cooper
Mini (2001-2007 / R50, R53, R52) Let's find out in this guide the steps that will allow us to remove and replace the windshield of the Mini Cooper, following the instructions below.
Replacement of the windshield wiper motor of the Mini Cooper
Mini (2001-2007 / R50, R53, R52) In this video tutorial, we will see how to disassemble and replace the front windshield wiper motor of the Mini Cooper, following these simple steps.
Guide to replacing the wiper motor of the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) In this short and simple guide, we will see the instructions that will allow us to disassemble and replace the windshield wiper motor of the Mini Coo

    Frequently Asked Questions

    • Mini 2007-2014 - What is the Mini Cooper S power problem? Read Answer
    • Mini 2010-2016 - What problems with the Mini Cooper s water pump? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos