Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Replacement of the front headlight of the Mini Cooper

Mini - Video tutorial

Model: Mini Mini R50, R53, R52 - Years 2001-2007
Part: Headlight
Operation: Replacement of the front headlight of the Mini Cooper

These short and simple steps will show us the process of disassembling and replacing the front headlight and bulbs of the Mini Cooper. First, we open the car's engine hood and start unscrewing the fastening screws of the headlight, which are located on the sides; then we disconnect the electrical connector of the bulbs to remove the optical group, as shown in the video. At this point, if necessary, we replace the low beam or high beam bulb, replacing the entire front headlight if necessary; then we reassemble everything, applying the reverse process!


Posted on 16 May 2024 by ScegliAuto



How to remove the headlight of a Mini Cooper
Mini (2007-2014 / R55, R57, R56) Before we begin, we will have to go and open the front hood of our Mini Cooper. So let's start by unscrewing and removing the bolts that secure the h
How to remove the headlight of a Mini Cooper
Mini (2001-2007 / R50, R53, R52) Before we can begin, we will have to go to open the front hood of our Mini Cooper, thus reaching the inside of the headlight. So let's start by unscr
How to replace the front headlight bulb of the Mini Cooper R56
Mini (2007-2014 / R55, R57, R56) If you own a Mini Cooper R56 and want to find out how to replace the front headlight bulb, all you have to do is follow the steps described in our ne

    Frequently Asked Questions

    • Mini 2014-2023 - What are the position lights on the Mini Cooper for? Read Answer
    • Mini 2001-2007 - How to replace the sidelights on the Mini Cooper? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos