Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : Disassembly of the front bumper of the Mini Countryman

Mini - Video tutorial

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Front bumper
Operation: Disassembly of the front bumper of the Mini Countryman

Today's step-by-step instructions will show us how to disassemble and replace the front bumper of the Mini Countryman. First, we open the car's hood and start unscrewing all the fastening screws we find on the top; then we remove the plastic fenders of the front wheel arches, unscrewing the fastening screws of these, as shown in the video. At this point, we gently detach the bumper on the sides until we remove it completely, installing the new one; we fix it properly and reassemble all the components, following the reverse procedure!


Posted on 18 May 2024 by ScegliAuto



How to remove the brake light bulb of a Mini Countryman
Mini (2010-2016 / Countryman1, R60) Before we are able to begin, we will have to open the tailgate of our Mini Countryman. Let's start by disengaging and removing the internal side cove
How to replace the battery of a Mini Countryman Diesel
Mini (2010-2016 / Countryman1, R60) Before we begin, we will need to open the front hood of our Mini Countryman. So let's start by unscrewing and removing the screws that secure the bat
Disassembly of the front bumper of the Mini Cooper.
Mini (2001-2007 / R50, R53, R52) Today's guide will show us the necessary steps on how to disassemble and replace the front bumper of the Mini Cooper, in simple steps. First, we open

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos