Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Volvo
    3. : V50 : Guide to replace the Moto Guzzi V50 clutch

Model: Volvo V50
Part: Clutch
Guide to replace the Moto Guzzi V50 clutch

In this guide we will see the steps that will allow us to disassemble and replace the Moto Guzzi V50 clutch unit, following the instructions below. To disassemble the clutch, in this case, the engine is disassembled from the frame; in fact we find the clutch on the front of the engine. So let's first disassemble the clutch cover; now we unscrew the flywheel screws to remove it, thus accessing the clutch plates. We just have to remove them and replace them with new ones, following the video tutorial to the end for the complete reassembly!


Posted on 6 August 2022 by ScegliAuto



Guide to deactivate the immobilizer on the Volvo V50 - S40
Volvo V50 (2004-2012 / MK 1) In this guide we will see the instructions to deactivate the immobilizer system on the Volvo V50, but also on the S40 and C30. First of all, we open
Guide to replacing the timing belt of the Volvo V50 2.0L.
Volvo V50 (2004-2012 / MK 1) The procedure illustrated in this guide will show us how to dismantle and replace the timing belt of the Volvo V50 2.0L, as well as the V70. First, w
Disassembly of the rear seats of the Volvo V50
Volvo V50 (2004-2012 / MK 1) Today's guide will show us how to disassemble the rear seats of the Volvo V50, following the instructions below. First, we open the rear doors and be

How do you replace the brake pads on the BMW F850 GS?

In order to replace the brake pads of the BMW F850 GS, you need to perform the same operation for both the front wheel and the rear wheel: it will be necessary to unscrew the bolts that secure the brake caliper to the relative disc, so that it can be removed by removing the pads that are inside. Once the old pads have been removed, it will be possible to insert the new spare parts, repositioning the caliper on the disc and fixing it with the relative bolt. After installation it will be necessary to check that the brake works correctly.

Watch the video!


by ScegliAuto

More videos