Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Moto Guzzi
    3. :
  3. V85tt
    4. : How to replace the engine oil of a Moto Guzzi V85TT?

Model: Moto Guzzi V85tt
Part: Engine oil
How to replace the engine oil of a Moto Guzzi V85TT?

To perform the oil change on our Moto Guzzi V85TT, we start by making sure the engine is cold. We place the motorcycle on a flat and stable surface. We remove the oil cap on the side of the engine and place a container under the oil drain cap. We remove the drain cap and let the used oil drain completely. We check and replace any damaged gaskets. We screw the drain cap back on securely. We fill the engine with the recommended motor oil up to the correct level, and we will have completed the oil change on our Moto Guzzi V85TT.


Posted on 22 March 2024 by ScegliAuto



Changing the engine oil and the oil filter of the Moto Guzzi V85TT
V85tt In this short video, let's find out the steps that will allow us to carry out the ordinary maintenance coupon, replacing the engine oil and the oil f
How to change the gearbox oil on the Moto Guzzi V85TT?
V85tt To be able to change the gearbox oil of the Moto Guzzi V85TT you need to loosen the gearbox oil drain plug, which is located in the lower part of the
How do you change the engine oil on a Moto Guzzi V85TT?
V85tt To replace the engine oil of the Moto Guzzi V85TT, you need to unscrew the oil tank drain plug, which is located in the central lower part of the mot

How do you replace the piston on the Sherco SE 250?

The Sherco SE 250 piston is replaced by loosening the screws that secure the cylinder in the upper part of the engine block: in order to remove this cylinder it will also be necessary to disconnect the connectors connected to the engine block itself. Once the cylinder has been removed, it will be possible to access the underlying piston, which will have to be detached from the relative connecting rod by removing the relative fixing ring. When this in turn has been removed, it will be possible to insert the new spare part, then also installing the cylinder.

Watch the video!


by ScegliAuto

More videos