Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Fiat
    3. : Strada : Disassembly of the Moto Morini Strada valve

Model: Fiat Strada
Part: Valve
Disassembly of the Moto Morini Strada valve

Today we will see how to remove one of the valves of a 1978 Moto Morini Strada. First we are going to remove the cylinder head screws: then we access the valve compartment and also remove the plastic engine protection bulkhead. At this point we are going to remove the register of our valves, unscrewing the nut and removing the washer and extracting the valves. At this point we reassemble everything, taking care to reassemble the valves perfectly and tighten them if possible with a torque wrench; once adjusted, replace the cylinder head cover!


Posted on 18 December 2023 by ScegliAuto



What is the fuse scheme of the Fiat Strada?
Fiat Strada (1998-2021 / MK 1) In this video we can see the fuse diagram of the Fiat Strada, to be consulted in case we need to check the state of the fuse of one or more malfuncti
Replacing the fuel filter on Fiat Strada
Fiat Strada (1998-2021 / MK 1) To replace the fuel filter on Fiat Strada you must initially lower yourself under the vehicle (if you have the appropriate equipment, you should lift
What is the unlock code for the Fiat Strada car radio?
Fiat Strada (1998-2021 / MK 1) The unlock code for the Fiat Strada's radio can be obtained by completely disassembling the device and removing it from its housing. This will allow

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos