Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pixo
    4. : How do i remove the door panel of the Nissan Pixo?

Nissan Pixo - Video tutorial

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Door
Operation: How do i remove the door panel of the Nissan Pixo?

The Nissan Pixo door panel can be removed by unscrewing the bolt located next to the window control panel. Once this has been removed, it will be possible to detach the triangular cover which is located in correspondence with the external rear-view mirror. By removing the rivet located at the top right of the panel and unhooking the clips on the bottom, the panel can be completely removed. Once this has been removed, it will be possible to replace them with a new spare part, which must be properly fixed.


Posted on 21 March 2024 by ScegliAuto



Disassembly of the door panel of a Nissan pixo
Nissan Pixo (2009-2013 / MK 1) Removing the door panel of a Nissan pixo, let's see how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in t
How do you reset the Service indicator of the Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To reset the Service light of the Nissan Pixo, you need to turn on the instrument panel by turning the key inside the ignition switch. Once the panel
How to replace the air filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before we can begin, we will have to go and open the front hood of our Nissan Pixo. So let's start by disassembling and removing the air filter cover

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos