Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Sunny
    4. : How to replace the oil pan on Nissan Sunny

Nissan Sunny - Video tutorial

Model: Nissan Sunny N17 - Years 2011-2020
Part: Oil pan
Operation: How to replace the oil pan on Nissan Sunny

To replace the engine oil pan on Nissan Sunny 2020, as a first step, for safety, it is recommended to disconnect the negative pole of the battery. Then position the machine on a hydraulic bridge and locate the oil pan to be replaced. Place an exhausted oil collection tank under the sump and unscrew the drain plug to drain all the oil. Once finished, take out the seven bolts and remove the oil pan. Thoroughly clean the edges where it was placed. On the new one, use a silicone gasket to be applied around the edge and install it in place of the old one using the same bolts.


Posted on 16 July 2022 by ScegliAuto



How to make the service (oil change) to the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Below we will see in this short and simple guide how to carry out the routine maintenance service, replacing the engine oil and the oil filter, of th
How to replace the suspension arm of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Let's see today the steps on how to disassemble and replace the suspension arm of the Nissan Sunny, following the instructions below. First we lift t
How to replace the cabin filter in a Nissan Sunny?
Nissan Sunny (2011-2020 / N17) In this tutorial, we can see how to replace the cabin filter in the Nissan Sunny, an extremely simple and fast operation. First of all, let's positio

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos