Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : Nissan Rogue fuse diagram

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Fuse box
Operation: Nissan Rogue fuse diagram

We can see through this very short video tutorial the position of the two fuse boxes present on a second generation Nissan Rogue, model in production from 2014 to 2020. The first fuse box is positioned inside the engine compartment on the right as shown in the video, so to reach it we will first have to pull the hood release lever. The second fuse box, on the other hand, is located inside the vehicle's passenger compartment, more precisely located on the lower part of the driver's side dashboard behind a small plastic panel to be removed.


Posted on 20 April 2023 by ScegliAuto



Fuse box and fuse positioning of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this guide, we will see the diagram and positioning of the fuse boxes of the Nissan Rogue, following the instructions below. First, we open the ho
Where is the fuse box of the Nissan Rogue located?
Nissan Rogue (2008-2015 / S35) The 2012 Nissan Rogue has two fuse boxes inside. The first fuse box is located inside the front hood, specifically near the battery. To view the fuse
Fuse localization of the Nissan Rogue version s35
Nissan Rogue (2008-2015 / S35) Let's see the localization of the fuse boxes for the Nissan Rogue: In the engine compartment, we find two fuse boxes, located between the battery and

    Frequently Asked Questions

    • Rogue 2008-2015 - Where is the fuse box located in the 2011 Nissan Rogue? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos