Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the trunk shock absorbers on the Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Hydraulic pistons
Operation: How to replace the trunk shock absorbers on the Nissan Qashqai

To replace the shock absorbers in the trunk of the Nissan Qashqai, open the trunk, insert a small screwdriver in the slot at the top of the piston and release the tab; once the tab has been released, remove the upper part of the shock absorber by holding the trunk up with a stick, also remove the lower part of the shock absorber and clean the hooks. Once the hooks have been cleaned, we put some grease on the upper hole of the shock absorber and hook it to the boot latch, then lift the boot and hook it to the one on the pillar of the car as well. We perform the same operation on the other side and we can test the correct functioning of the shock absorbers.


Posted on 30 April 2023 by ScegliAuto



Replacement rear shock absorbers on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Let's see the replacement of the rear shock absorber on Nissan Qashqai. We loosen the pins of the rim with a special tool (telescopic wrench or compr
How do you replace the front shock absorber on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In order to replace the front shock absorber of the Nissan Qashqai, the car must be lifted with a jack or a bridge, so that the fixing bolts of the f
Replacement of front shock absorbers
Nissan Qashqai (2006-2014 / J10) To replace the front shock absorbers, lift the car on the bridge, remove the front wheel, disconnect the connecting rod from the bracket on the shock

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos