Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to change the battery of the Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Battery
Operation: How to change the battery of the Nissan Micra

Today we will see the step-by-step instructions that will allow us to disassemble and replace the battery of the Nissan Micra, following these simple steps. First of all, we open the engine hood and start by disconnecting both battery terminals (positive and negative), using a star or socket wrench. Then, we unscrew the fixing screw of the battery bracket, in order to remove it from its compartment, as shown in the video. At this point, we install the appropriate battery, of the right type and with the same amperage; we make the electrical connection and secure it properly!


Posted on 22 August 2023 by ScegliAuto



How to replace the battery of the Nissan Micra
Nissan Micra (2010-2017 / K13) Below we will see the steps that will allow us to disassemble and replace the engine battery of the Nissan Micra, following the instructions below. F
Where is the fuse box of the Nissan Micra 2005 located?
Nissan Micra (2002-2010 / K12) Fortunately, the box containing all the various fuses for your 2005 Nissan Micra is easily identifiable in a few seconds and thanks to the procedure
Where is the fuse box on the 2016 Nissan Micra
Nissan Micra (2010-2017 / K13) If you want to locate the fuse box of your 2016 Nissan Micra yourself, just read the following instructions carefully and put them into practice. Fir

    Frequently Asked Questions

    • Micra 2017-2024 - How many amps is the battery in the Nissan Micra? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos