Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to replace the reverse sensor in the Nissan Micra?

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Reverse gear switch
Operation: How to replace the reverse sensor in the Nissan Micra?

As we can see in this tutorial, replacing the reverse switch in the Nissan Micra is an extremely simple and fast operation. First of all, we lift the front left side of the vehicle, taking all necessary safety measures, then we go underneath it and locate the sensor in question, located right in front of the CV joint boot. Then, we disconnect the connector by releasing the clip, apply some penetrating spray and unscrew the sensor using a 24mm socket wrench. To install the replacement, simply follow the reverse procedure.


Posted on 9 October 2023 by ScegliAuto



Nissan Micra reverse switch replacement
Nissan Micra (1992-2002 / K11) Today we will see the main steps on how to disassemble and replace the reverse gear switch of a first series Nissan Micra. First of all we lift the c
How to replace the spark plugs of the Nissan Micra 1.0.
Nissan Micra (2002-2010 / K12) Below we will see the steps that will allow us to disassemble and replace the spark plugs of the Nissan Micra 1.0 engine, following the instructions
How to replace the exterior mirror on a Nissan Micra
Nissan Micra (2002-2010 / K12) Before we begin, we will need to open the front door of our Nissan Micra. Let's start by unhinging and removing the inner cover located near the rear

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos