Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Sunny
    4. : How do you replace the water pump of the Nissan Sunny?

Nissan Sunny - Video tutorial

Model: Nissan Sunny N17 - Years 2011-2020
Part: Pump
Operation: How do you replace the water pump of the Nissan Sunny?

In order to replace the water pump of the Nissan Sunny, you need to open the hood so that you can access the components located inside the engine compartment: this way you will be able to locate the water pump at the bottom left of the engine block. By unscrewing the central nut of the pulley and moving the timing belt, you will be able to locate the water pump: the latter can be removed from its seat by unscrewing the fixing screws and replacing it with a new spare part. After the replacement, you can reassemble all the removed components.


Posted on 19 March 2024 by ScegliAuto



How to replace the fuel pump on the Nissan Sunny n17
Nissan Sunny (2011-2020 / N17) The guide shows how to replace the fuel pump of the Nissan Sunny n17. The first operation to be performed is to lift the rear bench seat to access th
How to replace the suspension arm of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Let's see today the steps on how to disassemble and replace the suspension arm of the Nissan Sunny, following the instructions below. First we lift t
How to replace the rear headlight bulbs in the Nissan Sunny?
Nissan Sunny (2011-2020 / N17) As we can see in this tutorial, replacing the rear headlight bulbs of the Nissan Sunny is an extremely simple and fast operation. First of all, make

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos