Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : How to remove the gear shift knob of the Nissan Juke

Nissan Juke - Video tutorial

Model: Nissan Juke MK 2 - Years 2019-2024
Part: Gearshift gaiter
Operation: How to remove the gear shift knob of the Nissan Juke

Removing the gear shift boot of the Nissan Juke is a very simple operation, achievable in a few minutes thanks to our short video tutorial. To remove the boot, we must first release the outer plastic covering using a clip to leverage. Once the plastic part is removed, the boot will also lift up and can be pulled out of the gear shift by pulling it upwards, but first you must remove the gear shift by also pulling it upwards. Once removed, you can insert another boot or perform internal maintenance without any problems. To insert the boot, you must follow the same procedure but in reverse.


Posted on 22 March 2024 by ScegliAuto



How to remove the knob on Nissan Juke
Nissan Juke (2010-2019 / MK 1) How to replace the gear knob on a Nissan Juke? Let's see in this video how to disassemble the piece: disconnect the frame of the leather cap with a p
How do i replace the gear knob on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) In order to replace the Nissan Juke gear knob you have to grab the knob and pull it upwards, so that it can be detached from the end of the gear leve
How to remove the automatic gear knob of the Nissan Juke.
Nissan Juke (2010-2019 / MK 1) Let's see the steps below that will allow us to disassemble and replace the automatic gear knob of the Nissan Juke. First of all, we get into the car

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos