Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the internal handle of the rear door of a Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Bodywork
Operation: How to replace the internal handle of the rear door of a Nissan Qashqai

In this video, we see how to replace the interior handle of the rear door of a Nissan Qashqai J11: we start by removing the outer plastic body part of the inner lining. We will use plastic spatulas that do not damage the components, levering from the bottom upwards. We then remove the handle frame, and after removing the fixing screws of the handle, we can pull away the door lining. Now we can unscrew the screw that holds the handle to the body, then remove the handle connection to the door opening. We can find the replacement part on Amazon with the code B09P834QZF, priced at 17.99 euros (23.59 euros if you buy both the right and left), free delivery for Prime customers. Reconnect the handle to the door opening, put back the fixing screws, then put back the door panel, after reconnecting the electrical contacts. Put back the handle screws, fit the handle frame and all the fittings back in place.


Posted on 1 May 2024 by ScegliAuto



How to replace the door handle on the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In order to replace the door handle of the Nissan Qashqai you must first remove the cover of the handrail inside the door, in order to remove the scr
How to remove the exterior handle of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Removing the external handle of the Nissan Qashqai is a very simple and fast operation, let's see how to proceed in this tutorial. The procedure is v
How do I remove the Nissan Qashqai door panel?
Nissan Qashqai (2006-2014 / J10) In order to remove the door panel of the Nissan Qashqai you have to go and remove the molding located above the interior handle. Once the molding has

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos